This is my favorite go-to FDM 3D printer. It just works. It's not a fast printer. Speed is not what I expect. Slow is good when the output quality is excellent. MamaCetus has it's own slicer software and G-Code generator called UPStudio. Cetus is a printer made by Tiertime. It will also run G-Code produced by other software such as Simplify3D. I have done so many times. I usually just run the printer UPStudio as the quality is very good even if a bit slow. Here it is printing one of my original designs, a small container vessel. The filament is eSun PLA+ Pine Green at 215 deg.C. with 150 micron layer height. 0.04MM nozzle. Print time will be a bit over 6 hours.

This is an original design I created. Both the bowl and the lid. They were drawn in Autodesk Fusion 360 and exported as STL files. Then sliced by Simplify3D and exported as a gcode file to an SD memory card. The printing was made from the code on the SD card with my Anycubic Kossel (Delta) 3D printer. Layer height is 150 microns. Total print time is 12 hours for the bowl and about 4 hours for the lid. This one is the second of three I have printed. The first was clear PLA which looks white, with a blue-jeans color lid. This is of course red with a very bluish shade of green lid, (Lookds blue in the picture!) The third is printing as I write this and the bowl color is called wheat. The lid co...